Dimovodna cev za kotao

How to Choose a Flue Pipe?

Vodič na osnovu 20+ godina iskustva na terenu.

Choosing the right flue pipe diameter is crucial for the efficiency of your heating system and the proper operation of your heating appliance. Whether you are using a stove, boiler, or fireplace, it is important to choose a flue pipe that does not restrict the capacity of the flue gas exhaust system. (Check the heating appliance manual to determine the specified flue pipe diameter).

Chimney flue pipe diameter should not be smaller than the diameter of the outlet on the boiler. For example, if the boiler outlet is Ø160 mm, the flue pipe system should not be smaller than Ø160 mm.

If the specified flue pipe and chimney diameters are different, they can be connected using a reducer. For example, if the boiler outlet is Ø120 mm and the chimney diameter is Ø200 mm, a Ø120-to-Ø200 mm reducer should be installed before the connection to the chimney. Proper selection of the flue pipe ensures the efficiency and safety of your heating system.

What Is a Flue Pipe, What Is It Used For, and Why Is the Choice of Material Important?

Flue pipes and components are used to connect the heating appliance to the chimney. Their role is not only to connect the boiler and chimney, but also to properly direct flue gases into the chimney, ensure adequate draft, and withstand high temperatures.

Flue pipes are most commonly single-wall, as the connection is usually installed inside the building. Flue components can be made of black steel or stainless steel.

The difference between black steel and stainless steel is not only visual but also relates to the technical characteristics of the materials:

Black Steel – More affordable and easy to match with an interior thanks to its black finish. It conducts heat well, and its service life can be up to 10 years when properly selected and when the entire heating system operates correctly.

Stainless Steel Flue Pipes – More expensive than black steel, but more durable (virtually everlasting) and better at conducting heat.

How to Determine the Correct Diameter of Flue Components?

The diameter of the flue components must correspond to the diameter of the heating appliance outlet. This is the starting point and should not be overlooked. A common mistake we encounter is installing a larger-diameter pipe in the belief that it will provide better draft. In reality, the opposite can happen: the flue gases move more slowly, cool down before reaching the top of the chimney, and this can result in increased condensation. On the other hand, a smaller-than-specified diameter creates additional resistance and reduces draft. This can cause the chimney to perform poorly and may even result in smoke returning into the room.

Flue pipes can be divided into two groups, with the following diameters being the most commonly used in our market:

Flue Pipes for Boilers and Pellet Stoves:

  • Ø80
  • Ø100
  • Ø120

Flue Pipes for Solid-Fuel Boilers:

  • Ø120
  • Ø130
  • Ø150
  • Ø160
  • Ø180
  • Ø200

Number of Elbows and Length of the Flue Run

Each flue connection should have at least one elbow, while boiler and stove manufacturers often recommend using two elbows per flue run. Too many elbows can lead to a loss of draft, which is why you should:cuga’ ili promaje i zato treba:

  • Plan the flue route properly, ideally with no more than two 90° elbows.
  • Keep horizontal sections of the pipe as short as possible.
  • For longer flue runs or systems with a larger number of bends, it is often necessary to use a larger flue diameter to increase the internal volume available for flue gases until the system establishes sufficient draft.

Most Common Mistakes When Buying Flue Pipes

  1. The pipe diameter does not match the heating appliance outlet diameter.
  2. Insufficient sheet metal thickness for intensive heating. Our flue pipes are made from thick boiler-grade steel designed to withstand even extreme operating conditions.
  3. Too many bends in the flue system due to the layout, instead of adapting the overall installation to the pipework.
  4. The horizontal section has no appropriate slope, which can allow condensate to flow back toward the stove.
  5. The purchase is based solely on price without checking the material thickness and sealing clearances.

The Flue Pipe Is Not the Only Part of the System

Choosing a high-quality flue pipe is not enough if the chimney does not have the appropriate diameter, height, insulation, and construction. That is why choosing a high-quality chimney is equally important. A properly selected stainless steel chimneycombined with suitable flue pipes, enables proper flue gas flow, reduces the possibility of condensation, and contributes to safe system operation. If you are planning to install or replace a chimney, take a look at our guide to learn what to consider when choosing the appropriate chimney diameter, material, and height.

Conclusion

U svakom slučaju dimovodni elementi su važan deo grejnog sistema i ne treba ih shvatati olako. Na osnovu iskustva možemo savetovati da redovno čistite i održavate sistem i da dimovodne elemente birate prema grejnom telu koje koristite. Time ćete produžiti radni vek i dimnjaku i grejnom telu koji koristite.

If you have any questions or concerns, feel free to contact us. We will be happy to provide professional advice and help you choose the right solution.

Frequently Asked Questions About Flue Pipes

The safest approach is to check the diameter of the outlet on your stove or boiler (measure the outlet diameter) or refer to the manufacturer's recommendations for the appliance.

The flue pipe should have the appropriate diameter to ensure that flue gases can pass through the system properly. The most common mistakes occur when the diameter is reduced.

For example, if the stove has a Ø120 outlet, it is not recommended to use a flue pipe with a diameter smaller than Ø120.

Not necessarily. Many people think that a larger diameter will automatically improve chimney performance, but an oversized diameter can have the opposite effect.

If the flue pipe is too large in relation to the appliance, the flue gases may move more slowly and cool down more, which can lead to weaker draft and increased condensation.

The best solution is always to use the appropriate diameter specified for the heating appliance.

Generally, no. Reducing the diameter without the approval of the heating appliance manufacturer can cause problems with combustion and flue gas exhaust, including inadequate draft.

If there is a problem with the existing chimney, it is better to address the underlying cause rather than reduce the pipe diameter.

For wood-burning stoves, painted flue pipes made of 1 mm thick cold-rolled (CR) steel sheet, or stainless steel flue components, are most commonly used, depending on the operating conditions.

When choosing, consider:

  • the stove's output
  • the temperature of the flue gases
  • the length of the flue run
  • the conditions in which the pipe is installed
  • the diameter of the boiler or stove outlet

It depends on the intended use. Stainless steel offers excellent corrosion resistance and is used where conditions are more demanding. Painted flue pipes are often an excellent solution for connecting stoves and fireplaces in indoor spaces. The right choice is not always the most expensive one, but the one that best suits the specific conditions.

If the flue pipe is located inside the room, it does not need to be insulated, while if it passes through an exterior environment, it must be insulated. For a standard connection between a stove and a chimney, uninsulated flue pipes are generally used. Insulation mainly applies to chimneys that pass through cold spaces, the roof, or the exterior part of the building. The purpose of insulation is to keep the flue gases warm and reduce the formation of condensation.

There is no universal number that applies to every system, but the rule is simple: The fewer changes in direction, the better. Every elbow creates additional resistance to the flow of flue gases. Whenever possible, it is better to create a shorter and more direct flue run with fewer elbows, while keeping in mind that the minimum number of elbows is 1 to 2 elbows.

No, flue components do not require additional sealing, except in special cases where this is recommended by the manufacturer or required due to specific on-site conditions.

Tehnički gledano, montaža jeste jednostavna, ali greške se često prave upravo kod spojeva, nagiba i izbora elemenata. Kod jednostavnijih sistema možete montirati sami, dok je kod složenijih sistema preporuka da angažujete stručno lice.

This is only possible if the dimensions are compatible. Even if two pipes are marked with the same diameter, small differences in manufacturing can cause problems when connecting them. It is best to use components from the same manufacturer.

It is best to purchase from a manufacturer or a trusted distributor or retailer who can recommend the right solution. A high-quality flue pipe is not simply an off-the-shelf product; expert support when choosing the right solution is equally important. In our experience customers often send us a photo of the existing installation first, and we then work together to select the appropriate components. This helps avoid unnecessary costs and installation mistakes.

Request a Quote for Flue Components

We respond within one business day, with free advice.

Call us Contact Us